Smart ProductsHeatit Z-Water2

Heatit Z-Water2

Z-Wave Regulator 868.4 MHz

Log in to get your personal prices. Register Login
Heatit Z-Water2 is a DIN-rail regulator for controlling waterbased heating systems. The module clips right onto a DIN-rail and allows you to control your waterbased heating through your Z-Wave network. Heatit Z-Water2 is equipped with 9 potential free relays for actuators. It also has 2 analog inputs for temperature sensors.

The Heatit Z-Water2 relays may be controlled by associations with other Z-Wave thermostats e.g Heatit. Each relay can control one or several actuators in your heating system.
GTIN: 7071236016458
Art.no.: 4512495
Features
  • Z-Wave
  • Regulator for waterbased heating systems
  • 9 potential free relays
  • Valve exercise
  • Can control 230VAC actuators and 24V actuators from an external power supply
  • Can be used with Heatit thermostats in each heating zone
  • DIN-rail mounting
  • Connector for external antenna
  • SmartStart
  • Firmware update (OTA)
  • Supports encryption mode S0, S2 Authenticated Class, S2 Unauthenticated Class
Technical data
  • IOT Protocol: Z-Wave - 868.4 MHz (EU)
  • Voltage: 240V, 230V 50Hz, 230VAC 50Hz
  • Max current (Ampere): 5
  • Own power usage (watt): 0.4
  • Max installation temperature (°C): 40
  • Min installation temperature (°C): 5
  • Min. working temperature (°C): 5
  • Protection grade (IP): IP20
  • Certifications: Z-Wave Plus
  • Ambient humidity (RH non-condensing %): 10-85
  • Ambient temperature range in storage (°C): -30-70
  • Total gross effect (W): 1350
  • Declarations: CE, CE declaration, Z-Wave Plus
  • International standard: CE
  • Signal range radio frequency (max no. meters): 40
  • Max connection dimension (mm²): 2,5mm²
  • Max ambient humidity (%RH): 85% RF
  • Max temperature without load (°C): 40
  • Max temperature with load (°C): 40
  • Assembly / mounting location: DIN Rail
  • Package size: 1
  • Product height (mm): 58
  • Product length (mm): 86
  • Product width (mm): 105
  • IOT Chip type: Z-Wave 800 chip
  • Z-Wave encryption mode: S2 Unauthenticated Class, S2 Authenticated Class, S0
+ Show more (19)
- Show less
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.

VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Compact design - The unit takes up little space but has a total of 9 relay outputs.

Valve exercice - Prevent actuators from getting stuck with the built-in configurable valve exercice.

External antenna - Possibility of connecting an external antenna for better range.

Temperature control - Via inputs for external temperature sensors you can have full control over the water temperatur in your system.

Potential-free relays - The unit has potential-free relays so you can control actuators with different voltages.

Thermostat controll - Can be used in combination with different Heatit Thermostats. Both 230VAC and battery operated.
Maintenance
The device is maintenance-free. Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 210.00
Base price subjective to 0% VAT: € 210.00


Heatit Z-Push Wall Controller Black Matt
Battery operated wall switch
Art.no.: 4512694
€ 46.00
Heatit leakage stopper
Leakage stoppers for ball valves
Art.no.: 4566651
€ 354.00
Heatit ZM Single Relay 16A
Art.no.: 4512671
€ 44.00
Heatit Z-Temp2 Black RAL 9011
Z-Wave battery operated temperature sensor
Art.no.: 4512667
€ 71.00
x