Heatit ZM Thermostat is a thermostat for concealed installation in a flush box. The thermostat allows you to control the electrical heating through your Z-Wave network.
The device has a single-pole break of 16A, and must be connected to an external wired sensor. The thermostat has a maximum load of 16A at 230VAC.
Heatit ZM Thermostat has power metering and it gives you the real time information about your power consumption.
The thermostat can withstand a load of max. 16A/3600W at 230VAC. We recommend a contactor for loads above 13A.
Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class
Technical data
IOT Protocol:Z-Wave - 868.4 MHz (EU)
Voltage:230V 50Hz
Max load (Watt - resistive load):3600
Max current (Ampere):16
Own power usage (watt):1
Max installation temperature (°C):40
Min installation temperature (°C):5
Protection grade (IP):IP 20
Certifications:Z-Wave Plus
Alternate IoT-communication procols:No alternative communication protocols
Ambient humidity (RH non-condensing %):10-95
Ambient temperature range in storage (°C):-50
Total gross effect (W):3600
Declarations:CE
International standard:EN 60669-2-1/A12:2010, RoHS 2002/95/EC, IEC 965-2-1, ETSI EN 301 489-3 V2.1.1(2017-03), ETSI EN 300 220-2 V3.1.1 (2017-02), EN 62479:2010, EN 60669-2-5:2016, EN 60669-2-1:2004 + A1:2009, EN 60669-2-1/A12:2010, WEE 2002/96/EC
The product is located in Sweden, and will be shipped from Sweden.
VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Maintenance
The product does not need maintenance.
For indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 53.00 Base price subjective to 0% VAT: € 53.00
