Tax: 0% | Geo: unknown
0
ProductsThermostatsHeatit Z-TRM6 DC White RAL 9003

Heatit Z-TRM6 DC White RAL 9003

Z-Wave thermostat 3A (Dry Contact) 868.4 MHz

€ 90.00 inc.vat

100+ In stock
Log in to get your personal prices. Register Login
Dry Contact thermostat.

Heatit Z-TRM6 DC is an electronic thermostat with a potential free relay, designed for boiler control, heat pumps and actuators. The thermostat can be controlled through your Z-Wave network or via the buttons on the front of the thermostat. The thermostat has a user friendly interface.

Heatit Z-TRM6 DC has 3 modes; Heat - Cool and Eco.

The thermostat fits in standard European junction boxes and may be used with most System 55 frames. It has a sturdy metal frame for secure fastening on the junction box. The thermostat has one built-in room temperature sensor. Two additional external temperature sensors may also be connected.

Heatit Z-TRM6 DC allows you to set the power metering value manually.

The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays E.g wall plugs.
GTIN: 7071236018988
Art.no.: 5430561
Features
  • Z-Wave thermostat
  • Internal room sensor
  • External room sensor (wired by cable)
  • Floor sensor
  • Temperature limiter
  • Boiler control and heat pumps
  • Control of actuators
  • 3 modes: Heat - Cool and Eco
  • Hysteresis/PWM
  • Temperature calibration
  • Open window detection
  • Relay status icon
  • Adjustable display brightness
  • Single pole switch
  • Lock mode/child lock
  • Temperature readout in gateway
  • Weekly schedule in gateway
  • Manual power metering
  • SmartStart
  • Firmware update (OTA)
  • Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Technical data
  • IOT Protocol: Z-Wave - 868.4 MHz (EU)
  • Voltage: 230VAC 50Hz
  • Own power usage (watt): 2
  • Hysteresis: 0,3 to 3,0 (default hysteresis 0,5)
  • Switch type: One-pole switch
  • Compatible NTC-sensors (Ω @ 25°C): 10, 12, 15, 22, 33, 47, 6.8, 100
  • Protection grade (IP): IP21
  • Alternate IoT-communication procols: No alternative communication protocols
  • Ambient humidity (RH non-condensing %): 10-85
  • Ambient temperature range in storage (°C): -30-70
  • Declarations: RoHS, Reach
  • International standard: CE, Nemko, Z-Wave Plus
  • Signal range radio frequency (max no. meters): 40
  • Max connection dimension (mm²): 2,5
  • IOT Chip type: Z-Wave 800 chip
  • Push buttons: 3
  • Z-Wave encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class
+ Show more (10)
- Show less
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.

VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Dry contact - Thermostat especially for controlling loads connected potential-free.

Modes - The thermostat has 3 modes: Heat - Cool, and Eco. Cool and Eco are new features.

Metal frame - The thermostat features a metal frame for secure mounting in the junction box, which enhances the product’s durability in contrast to previous plastic solutions.

Associations - The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays.

Power regulator - Heatit ZTRM-6 DC features a power regulator as an alternativ to temperatur regulation.

Hysteresis - With hysteresis regulation enabled, the thermostat will regulate solely based on temperature. The thermostat switches on and off based on the hysteresis value in relation to the setpoint.

Pulse width modulation/PWM - With pulse width modulation regulation enabled, the thermostat will regulate based on cycles. The thermostat switches on and off in percentage intervals of the cycle.

Open window detection - With open window detection, the thermostat detects if a window is open, allowing it to cut off heating when there is a rapid drop in temperature.

Manual powermetering - The thermostat has a manual power metering that gives you an overview of the consumption in real time. The size of load is set as a fixed value in the menu

Push buttons - With a combination of push buttons and touch functionality, the thermostat has become more user-friendly.
Maintenance
The device is maintenance-free. Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 90.00
Base price subjective to 0% VAT: € 90.00


Heatit battery adapter Z-Temp2 5V
Adapter for Z-Temp2 and Transformer
Art.no.: 4512668
€ 12.00
Multireg6 Black matt
Thermostat 3600W 16A
Art.no.: 5430535
€ 62.00
Heatit Z-Temp3 Black Matt
Battery operated thermostat Z-Wave
Art.no.: 4512691
€ 75.00
Heatit Pro Thermostat White RAL 9010
Thermostat 3600W 16A
Art.no.: 5430581
€ 60.00
x