Heatit Z-TRM6 DC is an electronic thermostat with a potential free relay, designed for boiler control, heat pumps and actuators. The thermostat can be controlled through your Z-Wave network or via the buttons on the front of the thermostat. The thermostat has a user friendly interface.
Heatit Z-TRM6 DC has 3 modes; Heat - Cool and Eco.
The thermostat fits in standard European junction boxes and may be used with most System 55 frames. It has a sturdy metal frame for secure fastening on the junction box. The thermostat has one built-in room temperature sensor. Two additional external temperature sensors may also be connected.
Heatit Z-TRM6 DC allows you to set the power metering value manually.
The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays E.g wall plugs.
Alternate IoT-communication procols:No alternative communication protocols
Ambient humidity (RH non-condensing %):10-85
Ambient temperature range in storage (°C):-30-70
Declarations:RoHS, Reach
International standard:CE, Nemko, Z-Wave Plus
Signal range radio frequency (max no. meters):40
Max connection dimension (mm²):2,5
IOT Chip type:Z-Wave 800 chip
Push buttons:3
Z-Wave encryption mode:S0, S2 Authenticated Class, S2 Unauthenticated Class
+ Show more (10)
- Show less
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.
VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Dry contact - Thermostat especially for controlling loads connected potential-free.
Modes - The thermostat has 3 modes: Heat - Cool, and Eco. Cool and Eco are new features.
Metal frame - The thermostat features a metal frame for secure mounting in the junction box, which enhances the product’s durability in contrast to previous plastic solutions.
Associations - The thermostat can be set up with multiple associations and can be used as a master thermostat. It can control up to 10 thermostats and 10 external relays.
Power regulator - Heatit ZTRM-6 DC features a power regulator as an alternativ to temperatur regulation.
Hysteresis - With hysteresis regulation enabled, the thermostat will regulate solely based on temperature. The thermostat switches on and off based on the hysteresis value in relation to the setpoint.
Pulse width modulation/PWM - With pulse width modulation regulation enabled, the thermostat will regulate based on cycles. The thermostat switches on and off in percentage intervals of the cycle.
Open window detection - With open window detection, the thermostat detects if a window is open, allowing it to cut off heating when there is a rapid drop in temperature.
Manual powermetering - The thermostat has a manual power metering that gives you an overview of the consumption in real time. The size of load is set as a fixed value in the menu
Push buttons - With a combination of push buttons and touch functionality, the thermostat has become more user-friendly.
Maintenance
The device is maintenance-free. Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 90.00 Base price subjective to 0% VAT: € 90.00
