DIN thermostat. Heatit DIN Thermostat is an electronic multifunction thermostat designed for electrical heating. The thermostat has a user-friendly interface that can be controlled via the buttons on the front of the thermostat.
Areas of use: - Floor heating - Gutter de-icing - Industrial applications from -30°C to 85°C
The Heatit DIN Thermostat is a versatile solution for both residential and industrial use. It can function as a standard floor heating thermostat, offering simple temperature control with three modes: Heat, Cool, and Eco. Additionally, it features a specially designed industrial function (INDU) that allows it to handle setpoints ranging from -30°C to 85°C, making it ideal for demanding industrial applications. It can also be used as a plus/minus snow melting thermostat (PLUS), adjusting temperatures for efficient snow and ice melting on outdoor areas, driveways, or stairs. With the Heatit DIN Thermostat, you get precise temperature control for a wide range of purposes.
The thermostat clicks easily onto a standard DIN rail and can be installed in the main switchboard. The thermostat has connection for two external temperature sensors.
Heatit DIN Thermostat features active power metering, providing real-time information about your power consumption. It also allows you to set the power metering value manually in case of connection with a contactor.
The device has implemented ZeroX™ technology. This technology makes sure the relay switches at 0V when turning on and off. With this technology the thermostat will have a much longer lifetime.
The thermostat can withstand a resistive load of up to 16A/3600W at 230VAC. For loads above 13A, we recommend using a contactor. The thermostat is designed for resistive loads. When using large resistive, capacitive, or inductive loads, a contactor should be used.
The product is located in Sweden, and will be shipped from Sweden.
VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Versatile Temperature Control - With 3 operating modes – Heat, Cool, and Eco – and the ability to adjust temperatures from -30°C to 85°C (INDU mode), the thermostat offers precise temperature control for both residential and industrial applications. It also includes a ± function for snow melting (PLUS mode).
Easy Installation and Maintenance - The thermostat can be mounted on a standard DIN rail, and it offers the option to connect an external antenna (optional accessory) for improved signal strength.
Hysteresis - With hysteresis regulation enabled, the thermostat will regulate based solely on temperature. It turns on and off according to the hysteresis value in relation to the setpoint.
PWM/Pulse Width Modulation (PWM) - With PWM regulation enabled, the thermostat will regulate based on cycles. It turns on and off in percentage intervals over the course of the cycle.
ZeroX™ Detection – The thermostat features ZeroX™ technology, which ensures the relay switches on and off at 0V, significantly extending the relay's lifespan.
Open Window Detection - With open window detection, the thermostat detects when a window is open and automatically cuts off heating to prevent energy waste during rapid temperature drops.
Active power monitoring – Provides an overview of total energy consumption for improved control and efficient energy management.
Overload Protection – The thermostat is equipped with built-in safety features such as overload protection and overheat protection for safe use.
Maintenance
The device is maintenance-free. Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 115.00 Base price subjective to 0% VAT: € 115.00
