Heatit Z-Temp3 is a battery-operated thermostat designed for controlling waterbased heating systems. Used in combination with the Heatit Z-Water2, you can control your heating system through the Z-Wave® network or via the buttons on the front panel. The thermostat has a user-friendly interface.
Heatit Z-Temp3 has 3 modes: Heat, Cool, and Eco.
The thermostat fits into System 55 frames, and may be mounted alongside other equipment such as e.g dimmers or light switches. Heatit Z-Temp3 can also be mounted directly on the wall or placed freely, e.g. on a shelf.
Heatit Z-Temp3 can be set as a master thermostat. This means that you can set the setpoint and mode on one unit, and it will automatically send the setpoint and mode to other connected units.
All communication between Heatit Z-Temp3 and the controlled device is 100% wireless.
Heatit Z-Temp3 uses 2x AAA batteries, but you can also connect the device to an external power source. The Heatit Transformer 230VAC (45 126 48) is recommended for this purpose.
Heatit Z-Temp3 can be associated with Heatit ZM Single Relay, other Z-Wave relays, Heatit ZM Thermostat, Heatit Z-TRM6 Thermostat and other Z-Wave devices to control other types of heating solutions.
Heatit Z-Temp3 is a great choice for the restoration or renovation of existing buildings, as it is easy to install without the need for wiring. We recommend using multiple 230VAC devices to create a mesh network.
Battery-operated thermostat for controlling relays and thermostats
Internal temperature sensor
Humidity sensor
Master thermostat
Hysteresis - PWM
3 modes: Heat - Cool - Eco
Open Window Detection
10 associations per group
LCD display with backlight
Lock mode/child lock
Firmware update (OTA)
SmartStart
Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class
Technical data
IOT Protocol:Z-Wave - 868.4 MHz (EU)
Voltage:3.3 VDC
Hysteresis:0,3 to 3,0 (default hysteresis 0,5)
Protection grade (IP):IP21
Ambient humidity (RH non-condensing %):10-85
Ambient temperature range in storage (°C):-30-70
Declarations:RoHS, Reach, RED
International standard:CE, Z-Wave Plus
Signal range radio frequency (max no. meters):40
SDK:7.18.3
IOT Chip type:Z-Wave 800 chip
Push buttons:3
Z-Wave encryption mode:S0, S2 Authenticated Class, S2 Unauthenticated Class
+ Show more (6)
- Show less
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.
VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Modes - The thermostat has 3 modes: Heat, Cool, and Eco.
Associations - The thermostat allows you to set associations, making it a master thermostat. In total, it can control 10 thermostats and 10 external relays.
Hysteresis - With hysteresis control enabled, the thermostat will regulate based solely on temperature. The thermostat engages and disengages based on the hysteresis value in relation to the setpoint.
PWM/Pulse with Modulation - With PWM/pulse with modulation control enabled, the thermostat regulates based on cycles. The thermostat engages and disengages in percentage intervals of the cycle.
Open Window Detection - With open window detection, the thermostat senses if a window is open, cutting off heating in the event of a rapid temperature drop.
Push Button - With a push button that provides clear feedback during use.
External Power Supply - Option for connecting an external power supply.
System 55 - Fits into standard frame systems. Blends easily into your existing design.
AAA Batteries - Standard batteries that are commonly available.
Maintenance
The device is maintenance-free.
Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 75.00 Base price subjective to 0% VAT: € 75.00
