Tax: 0% | Geo: unknown
0
ProductsThermostatsHeatit DIN Smart Thermostat

Heatit DIN Smart Thermostat

Thermostat for DIN-Rail 3600W/16A

€ 130.00 inc.vat

20+ In stock
Log in to get your personal prices. Register Login
Smart DIN Thermostat. Heatit DIN Smart Thermostat is an electronic multifunction thermostat designed for electrical heating. The thermostat can be controlled through Z-Wave® via a Z-Wave gateway. It can also be controlled using Modbus RS-485 and the buttons on the front of the thermostat. The thermostat features a user-friendly interface.

The Heatit DIN Smart Thermostat is a versatile solution for both residential and industrial use. It functions as a standard floor heating thermostat, offering simple temperature control with three modes: Heat, Cool, and Eco. With the DIN Smart Thermostat you get precise temperature control for a variety of applications.

The thermostat clicks easily onto a standard DIN rail and can be installed in the main switchboard. The thermostat has connection for two external temperature sensors. The Heatit DIN Smart Thermostat features active power metering, providing real-time information about your power consumption. It also allows you to manually set the power metering value when connected to a contactor.

The device is equipped with ZeroX™ technology, which ensures the relay switches at 0V when turning on and off. This technology significantly extends the thermostat’s lifespan.

The Heatit DIN Smart Thermostat has been developed for central control systems, with all features easily accessible via MODBUS RS-485.

The thermostat is designed specifically for resistive loads. When controlling large resistive, capacitive, or inductive loads, it is essential to use an appropriate contactor to protect the thermostat from excessive load to ensure safe operation.

The thermostat can withstand a resistive load of up to 16A/3600W at 230VAC. For loads above 13A, we recommend using a contactor.
GTIN: 7071236018568
Art.no.: 5430459
Features
  • Smart DIN-Rail thermostat
  • Z-Wave
  • MODBUS 485
  • 2 temperature sensors (wired by cable)
  • - Room sensor
  • - Floor sensor
  • 3 modes: Heat - Cool - Eco
  • Power regulator
  • Temperature limiter
  • Temperature calibration
  • Hysteresis/PWM
  • ZeroX™ detection
  • Open window detection
  • Relay status icon
  • Adjustable display brightness
  • Single poled switch
  • Lock mode/child lock
  • Active power metering
  • SmartStart
  • Firmware update (OTA)
  • External antenna (not supplied with the device)
Technical data
  • Mounting: DIN Rail
  • Voltage: 230VAC 50Hz
  • Voltage Output: 230VAC 50Hz
  • Max load (resistive load): 3600W
  • Max load (resistive load): 16A
  • Connection terminals diameter: 0.5 to 2.5mm²
  • Regulation temperature: 5 to 40°C
  • Compatible NTC-sensors (kΩ @ 25°C): 6.8, 10, 12, 15, 22, 33, 47, 100
  • Temperature sensitivity: ±0,5
  • Primary IoT Protocol: Z-Wave
  • Push buttons: 3
  • IP Code: IP20
  • Certification: LVD, Reach, RED, RoHS
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.

VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Flexible Control and Integration - The Heatit DIN Smart Thermostat supports Z-Wave® and MODBUS 485. This gives the user flexibility to tailor the thermostat to their smart home or industrial solutions.

Versatile Temperature Control - With 3 operating modes – Heat, Cool, and Eco.

Easy Installation and Maintenance - The thermostat can be mounted on a standard DIN rail, and it offers the option to connect an external antenna (optional accessory) for improved signal strength.

Hysteresis - With hysteresis regulation enabled, the thermostat will regulate based solely on temperature. It turns on and off according to the hysteresis value in relation to the setpoint.

PWM/Pulse Width Modulation (PWM) - With PWM regulation enabled, the thermostat will regulate based on cycles. It turns on and off in percentage intervals over the course of the cycle.

ZeroX™ Detection – The thermostat features ZeroX™ technology, which ensures the relay switches on and off at 0V, significantly extending the relay's lifespan.

Associations (Z-wave) – The thermostat allows you to create associations that make it a master thermostat. It can control up to 10 thermostats and 10 external relays, such as wall plugs, providing flexible and efficient control of multiple devices.

Open Window Detection - With open window detection, the thermostat detects when a window is open and automatically cuts off heating to prevent energy waste during rapid temperature drops.

Active Power Monitoring – Get real-time insights into energy consumption with active power monitoring for better control and cost efficiency.

MODBUS - The thermostat supports a large MODBUS register for easy integration into larger control systems.

Overload Protection – The thermostat is equipped with built-in safety features such as overload protection and overheat protection for safe use.

Firmware Updates (OTA) – Easy access to firmware updates to ensure the device is always up-to-date with the latest features.
Maintenance
The device is maintenance-free. Indoor use only.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 130.00
Base price subjective to 0% VAT: € 130.00


Multireg6 White RAL 9010
Thermostat 3600W 16A
Art.no.: 5430533
€ 58.00
Add to cart
Heatit WiFi6 White RAL 9003
Wi-Fi Thermostat 3600W 16A
Art.no.: 5430542
€ 95.00
Multireg6 White RAL 9003
Thermostat 3600W 16A
Art.no.: 5430534
€ 58.00
Add to cart
Heatit Z-TRM6 DC White RAL 9003
Z-Wave thermostat 3A (Dry Contact) 868.4 MHz
Art.no.: 5430561
€ 90.00
x