Heatit Z-Smoke2 Detector is a smart smoke detector designed to alert you against potential fire hazards. Heatit Z-Smoke2 Detector uses multi-criteria sensor technology to distinguish between fast-burning flames and slow-smoldering fires, while at the same time incorporates intelligent technology to differentiate between cooking smoke and actual life-threatening house-fire emergencies, virtually eliminating nuisance alarms.
In addition to its smoke detection capabilities, the smoke detector also features heat detection and temperature report to users. Heatit Z-Smoke2 Detector is a Z-Wave® enabled device and is compatible with Z-Wave enabled networks.
The smoke detector’s alarm situations, battery condition, operating conditions, supervisory data and general information are sent to the primary controller wirelessly. The device can also be serially connected with other sensors in the primary controller to serve as an extra siren.
Heatit Z-Smoke2 Detector calibrates for the air contents after warming up to determine a standard condition for the environment. It can also be manually instructed to calibrate for air content. The smoke detector is also pre-programmed to automatically calibrate every 15 days.
Meets the smoke detector requirements as specified in EN 14604
Back-up battery
Tamper switch
Supports encryption mode: S2 Unauthenticated Class
Technical data
IOT Protocol:Z-Wave - 868.4 MHz (EU)
Voltage:230VAC 50Hz
Own power usage (watt):2.2
Protection grade (IP):IP20
Ambient humidity (RH non-condensing %):10-85
Ambient temperature range in storage (°C):-30-70
Declarations:RoHS, Reach, RED
International standard:CE, EN 14604: 2005+AC:2008
Signal range radio frequency (max no. meters):40
Max sound level (dB):85 dB
IOT Chip type:Z-Wave 500 chip
Smoke sensor, type:Optical
Push buttons:1
Z-Wave encryption mode:S2 Unauthenticated Class
+ Show more (7)
- Show less
Stock Info
In stock
The product is located in Sweden, and will be shipped from Sweden.
VAT applicable for personal use. See Pricing-section.
Shipping cost will apply.
Key points
Advanced smoke detection with intelligent filtering – Effectively distinguishes between cooking smoke and real fire hazards, significantly reducing false alarms.
Multi-sensor technology for maximum safety – Detects both fast-burning flames and slow-smoldering fires using multi-criteria sensor technology.
Combined smoke, heat, and dust detection – Increases reliability across various fire scenarios, with a built-in temperature sensor for added safety and continuous reporting.
Z-Wave® compatible for smart home integration – Seamlessly integrates with Z-Wave-based systems and transmits status, alarms, and temperature data wirelessly to the primary controller.
Serial connection with up to 11 units – Can be connected via a gateway with up to 10 additional Z-Smoke2 units and also functions as an extra siren.
Automatic and manual calibration – Automatically adapts to its environment every 15 days and can also be calibrated manually when needed – ensuring optimal long-term performance.
It meets all EN 14604 requirements for smoke detectors in residential and commercial buildings.
230V power supply with battery backup – Ensures continuous operation with a fixed power connection and built-in backup battery in case of power outages.
Tamper switch and secure communication – Alerts in case of tampering and supports S2 Unauthenticated Class for encrypted communication.
Maintenance
The product should be tested regularly. Vacuum or blow the dust off the smoke detector regularly. The smoke detector must be replaced every 10 years.
Dealers / Where to buy
Based on your location Heatit Controls does not have a reseller or distributor in your country. You can take a look at our list of resellers and distributors on the Where to buy section or you can purchase directly from us in Sweden on this site.
Pricing
Base price without VAT: € 134.00 Base price subjective to 0% VAT: € 134.00
Data sheet 
Data sheet 
Quick Guide
